Spares, Consumables & Services

Also called: wrapping roll, pallet wrap

Hand or machine grade · 12–35 micron · pre-stretched options

Machine film at higher pre-stretch uses far less material per pallet than hand film. The saving is usually larger than expected.

BOPP, paper or reinforced · printed options

Tamper-evident and printed tape for e-commerce dispatch.

PP, PET or steel · with seals and buckles

PET has largely replaced steel for palletised loads — safer to cut and no corrosion.

Rolls, sheets and on-demand systems

On-demand systems save the storage volume that pre-inflated material consumes.

Cardboard or plastic angle

Spreads strapping tension and protects the load edge. Cheaper than the damage it prevents.

Rolls and dispensers

The recyclable alternative to plastic void fill.

Machine-applied hooding

Weather protection for outdoor-stored pallets.

Silica gel, clay, VCI film and paper

Monsoon shipping and export of ferrous parts.

Box, step or C-section · to length and load

Beam profile and connector must match the upright system. Mixing manufacturers' components is a common and unsafe shortcut.

Various depths and section profiles

Replacement is a controlled operation — the run is unloaded or propped before the frame comes out.

Ply, MS panel, mesh deck, chipboard

The most frequently replaced item in a shelving system.

One per beam end

The cheapest component in the system and the most commonly missing one.

Mechanical or chemical anchors

Specified from the slab thickness and the pull-out load, not from habit.

Bolted to the upright · anchored to slab

Distributes the column load into the slab. Anchoring is not optional.

Welded or bolted bracing

Bracing is what gives the frame its stiffness. A missing brace is a structural defect, not a cosmetic one.

Angle sections, fasteners, corner plates

The consumable side of a bolted racking system.

Ties back-to-back runs

Holds the flue space open and stabilises the pair as one structure.

Galvanised, various thicknesses

Out-of-plumb frames lose capacity rapidly. Shimming is part of a correct install.

Same working day across Mumbai, Bangalore and Hyderabad

Measures the building, the stock profile and the handling equipment. Everything else follows from it, and it costs nothing.

Annual survey with damage classification and report

Green, amber and red classification with a repair schedule against each finding.

Uprights, beams, braces and footplates

Damaged components are replaced, never straightened.

Own crews · phased around live operations

Most installations happen in a working warehouse. Phasing is planned so dispatch never stops.

Beam pitch changes, added levels, decking changes

Changing beam pitch changes the upright's rated capacity — the recalculation comes with the work.

Dismantle, transport, re-survey and re-install

Racking is an asset that moves with a lease. Re-erection includes a fresh load-notice calculation for the new layout.

Also called: AMC

Scheduled inspection, spares and priority response

Fixed-cost cover for operations that cannot carry an unplanned rack failure.

CAD layout with pallet positions, aisles and flow

Capacity, throughput and truck paths modelled before steel is cut.

SKU profiling, slotting and cube utilisation

Frequently finds 20–30% more capacity in an existing building without new racking.

Frame, beam and mezzanine calculations

Signed calculations for the loads stated on the load notice.

Cut, form, weld, powder-coat and load-test at Bhiwandi

One facility, one quality standard, no trading of another manufacturer's steel.

Safe loading, damage spotting, inspection routine

Delivered on your floor with your racking, not in a classroom.

Battery · 1,000–5,000 m²/hr

The economic answer above roughly 5,000 m² of floor.

Battery or mains

Mid-size floors and aisles a ride-on cannot enter.

Wet and dry · HEPA options

Dust control in food, pharma and electronics areas.

Cold or hot water

Dock aprons, yards and washdown areas.

Trolleys, mops, squeegees, brooms, signage

Colour-coded by zone in food and pharma sites to prevent cross-contamination.

Cardboard and film balers, compactors

Turns waste volume into a recyclable revenue stream instead of a floor-space problem.

Bait stations, insectocutors, monitoring

Audit requirement in every food and pharma warehouse.